PE, PLA or aqueous? How to choose a paper cup lining

· Cupartist· 4 min read

PE, PLA or aqueous? How to choose a paper cup lining

A paper cup can only hold coffee because of a thin barrier on the inside. That lining matters more than most café owners expect, because it decides how the cup should be disposed of after use. Here is how the three linings we offer compare, and how to choose between them.

Why paper cups need a lining

Paperboard on its own soaks up liquid. A barrier on the inside of the cup keeps the drink in and the board dry. All three of our linings work for both hot and cold drinks.

The three options

PE (polyethylene) lining

  • What it is: a thin polyethylene barrier on the inside of the cup. It is the long-established standard lining for takeaway cups.
  • Good to know: it is the only one of our linings available with a glossy finish.
  • Check before you choose: whether your area or your waste contractor runs a collection for paper cups.

Compostable PLA lining

  • What it is: a plant-based lining.
  • Good to know: the compostable route is commercial composting, where the facility accepts compostable cups.
  • Check before you choose: that your food waste or compost collector accepts compostable cups. Without that collection, the cup will not reach composting.

Aqueous coating

  • What it is: a water-based barrier coating used in place of a plastic film.
  • Good to know: available on runs of 30,000 cups or more.
  • Check before you choose: whether your local recycling accepts cups with this coating.

Side by side

PE Compostable PLA Aqueous
Barrier Polyethylene lining Plant-based lining Water-based coating
Hot and cold drinks Yes Yes Yes
Minimum order 1,000 cups 1,000 cups 30,000 cups
Finish Matte or glossy Matte Matte
Check locally Cup collection Commercial composting Recycling acceptance

You choose the lining as an option on any of our cups: single wall, double wall or ripple wall. It does not change the price per cup: at each size, quantity and lead time, PE, PLA and aqueous cost the same. See the price guide.

How to choose

Start with where your cups will end up.

  1. Customers take them away. The cup ends up wherever the customer finishes their drink. Choose the lining that fits the collections in your area, and consider a short line on the cup telling customers how to dispose of it.
  2. Cups stay on site or at an event. You control the bins, so you can set up the matching collection: a cup collection for PE, a compost collection that accepts compostable cups for PLA, or a recycling route that accepts the coating.
  3. Very large runs. At 30,000 cups or more, the aqueous coating becomes an option.

If you are unsure, ask us before you order. Our materials page has the same comparison with sample photos.

Be careful with green claims

If you print a claim such as "compostable" on your cup, make sure it is true for the cup you ordered and for how your customers can dispose of it. The Competition and Markets Authority's Green Claims Code explains how businesses should make environmental claims under UK consumer law.

Frequently asked questions

Are paper coffee cups lined with plastic?

Many are. PE is a thin plastic lining. Alternatives include a plant-based PLA lining and a water-based aqueous coating.

Which lining is best for hot drinks?

All three work for hot and cold drinks. Choose based on how the cups will be collected after use.

Does the lining change the price?

Not at Cupartist. The price per cup is the same for PE, PLA and aqueous. The aqueous coating needs an order of 30,000 cups or more.

Can I have a glossy finish?

Yes, with the PE lining. PLA and aqueous cups have a matte finish.

Keep reading